Raspberry Pi build checklist
Before starting, check board compatibility, power, storage and cable requirements.
Desk weather station
Boards: Raspberry Pi Pico, Raspberry Pi Zero 2 W, Raspberry Pi 3, Raspberry Pi 4, Raspberry Pi 5
Memory: Fits a Pico running MicroPython or a Zero 2 W running Raspberry Pi OS Lite.
Power
- Raspberry Pi Pico — USB power with a data-capable cable for setup
- Raspberry Pi Zero 2 W — 12.5 W Micro USB (5 V / 2.5 A)
- Raspberry Pi 3 — 12.5 W Micro USB (5 V / 2.5 A)
- Raspberry Pi 4 — 15 W USB-C (5 V / 3 A)
- Raspberry Pi 5 — 27 W USB-C PD (5 V / 5 A) recommended
Use compatible 3.3 V I²C modules and check their pinouts before connecting power.
Estimated add-ons: $15–35
Parts checklist
- BME280 sensor (needed)
- I²C OLED display (needed)
Jumper wires and a breadboard. Use a Pico with installed headers for a solder-free setup.
First three steps
- Load MicroPython on a Pico, or enable I²C in Raspberry Pi OS on a Pi computer.
- Wire the sensor and OLED with power disconnected, then use an I²C scan to confirm both addresses.
- Read the sensor values and refresh the display every few seconds.
Home DNS filter
Boards: Raspberry Pi Zero 2 W, Raspberry Pi 3, Raspberry Pi 4, Raspberry Pi 5
Memory: 512 MB is a starting point for a dedicated Pi-hole on a lightweight OS.
Power
- Raspberry Pi Zero 2 W — 12.5 W Micro USB (5 V / 2.5 A)
- Raspberry Pi 3 — 12.5 W Micro USB (5 V / 2.5 A)
- Raspberry Pi 4 — 15 W USB-C (5 V / 3 A)
- Raspberry Pi 5 — 27 W USB-C PD (5 V / 5 A) recommended
Use the board’s recommended supply for continuous operation.
Estimated add-ons: $0–15
Parts checklist
A connection to your home network.
First three steps
- Install a supported Raspberry Pi OS release and reserve an address for the Pi on your router.
- Follow Pi-hole’s official installation guide and configure one test device to use it for DNS.
- Confirm normal browsing and filtering on that device before setting DNS for more devices.
Retro game console
Boards: Raspberry Pi 3, Raspberry Pi 4, Raspberry Pi 5
Memory: 1 GB can be enough for older systems. Board support and emulation speed depend on the image and game.
Power
- Raspberry Pi 3 — 12.5 W Micro USB (5 V / 2.5 A)
- Raspberry Pi 4 — 15 W USB-C (5 V / 3 A)
- Raspberry Pi 5 — 27 W USB-C PD (5 V / 5 A) recommended
Use the board’s recommended supply. A ventilated case can help during longer sessions.
Estimated add-ons: $15–45 with an existing screen
Parts checklist
- HDMI monitor (needed)
- USB game controller (needed)
Board-compatible HDMI cable and homebrew games or game files you have the right to use.
First three steps
- Choose an emulator distribution that explicitly supports your board and flash it to spare storage.
- Connect the display and map the controller buttons.
- Load one compatible homebrew game and check video, audio and input before adding more.
Plant-growth time lapse
Boards: Raspberry Pi Zero 2 W, Raspberry Pi 3, Raspberry Pi 4, Raspberry Pi 5
Memory: 512 MB works for scheduled captures on a headless setup. Assemble the video on a faster computer if needed.
Power
- Raspberry Pi Zero 2 W — 12.5 W Micro USB (5 V / 2.5 A)
- Raspberry Pi 3 — 12.5 W Micro USB (5 V / 2.5 A)
- Raspberry Pi 4 — 15 W USB-C (5 V / 3 A)
- Raspberry Pi 5 — 27 W USB-C PD (5 V / 5 A) recommended
Keep the Pi on steady power and check storage space before a multi-day run.
Estimated add-ons: $25–65
Parts checklist
A stable mount and the camera cable that fits your board. Pi 5 and Zero use a smaller camera connector than Pi 3 and 4.
First three steps
- Mount the camera and fit the correct ribbon cable with the Pi powered off.
- Take a test image with rpicam-still on Raspberry Pi OS and adjust the framing.
- Schedule periodic captures, then copy the frames to a computer and render them into a video.
Home media server
Boards: Raspberry Pi 4, Raspberry Pi 5
Memory: 2 GB is a planning target for a small library using direct play. Transcoding can exceed the board’s practical limits.
Power
- Raspberry Pi 4 — 15 W USB-C (5 V / 3 A)
- Raspberry Pi 5 — 27 W USB-C PD (5 V / 5 A) recommended
A power-hungry drive may need its own supply or a powered hub.
Estimated add-ons: $35–100
Parts checklist
- External USB SSD (needed)
Ethernet connection and a small collection of media for testing.
First three steps
- Install Raspberry Pi OS and mount the USB SSD with a read-only account for the library.
- Install an ARM64 media server such as Jellyfin and add a small test library.
- Check direct playback on your home network with your actual player and media format.
Household file share
Boards: Raspberry Pi 5
Memory: 2 GB is a starting target for a small Samba share without extra services.
Power
- Raspberry Pi 5 — 27 W USB-C PD (5 V / 5 A) recommended
Use the recommended 27 W supply and check available clearance and cooling for the HAT and SSD.
Estimated add-ons: $50–140
Parts checklist
- NVMe HAT+ (needed)
- M.2 NVMe SSD (2230/2242) (needed)
Ethernet, a compatible case and a separate backup drive.
First three steps
- With the Pi powered off, install a compatible NVMe HAT+ and SSD using the manufacturer’s instructions.
- Mount the drive and create a password-protected Samba share on the local network.
- Test permissions from a second device and verify that you can restore a file from backup.
Smart mirror dashboard
Boards: Raspberry Pi 3, Raspberry Pi 4, Raspberry Pi 5
Memory: 2 GB is a planning target for a browser dashboard. A Pi 3 can run a minimal local display with fewer widgets.
Power
- Raspberry Pi 3 — 12.5 W Micro USB (5 V / 2.5 A)
- Raspberry Pi 4 — 15 W USB-C (5 V / 3 A)
- Raspberry Pi 5 — 27 W USB-C PD (5 V / 5 A) recommended
Budget a separate supply for the monitor and keep airflow around the Pi.
Estimated add-ons: $35–120 with an existing screen
Parts checklist
Compatible HDMI cable and a stable stand. Add two-way acrylic and a ventilated frame if mounting behind a mirror.
First three steps
- Connect the monitor and open a local dashboard in a browser.
- Start with the clock and weather, then add a calendar view that can be shown in a shared space.
- Test startup and readability at viewing distance before building the enclosure.
Home automation hub
Boards: Raspberry Pi 4, Raspberry Pi 5
Memory: 2 GB minimum for Home Assistant OS on a Pi 4 or Pi 5. Larger setups may benefit from more.
Power
- Raspberry Pi 4 — 15 W USB-C (5 V / 3 A)
- Raspberry Pi 5 — 27 W USB-C PD (5 V / 5 A) recommended
Use the recommended supply and place radio adapters away from USB 3 interference.
Estimated add-ons: $15–60 if buying a radio or test device
Parts checklist
- Compatible smart device (needed)
Ethernet and a microSD card of at least 32 GB. Some protocols require a separate USB radio.
First three steps
- Follow Home Assistant’s Raspberry Pi guide to install Home Assistant OS on spare storage.
- Add one supported device and verify its controls are available on your local network.
- Create a simple scheduled automation and export a backup of the configuration.
Local AI chatbot
Boards: Raspberry Pi 5
Memory: 8 GB is a reasonable starting target for a quantized 1–3B text model with short context. Check the runtime’s footprint.
Power
- Raspberry Pi 5 — 27 W USB-C PD (5 V / 5 A) recommended
Use the recommended 27 W supply and a cooler to reduce throttling during long runs.
Estimated add-ons: $10–30 for cooling or storage
Parts checklist
64-bit Raspberry Pi OS, several GB of free storage and active cooling for sustained testing.
First three steps
- Install an ARM64-compatible local inference runtime such as llama.cpp.
- Pick a small quantized model from a trusted source and test it on the Pi.
- Measure time to first token and memory use with short prompts before building a chatbot around it.